hmm podívej se do manuálu jestli pasivní není ve skutečenosti použitelnej i s aktivkou některý pasivní vstupy mívaj možnost akceptovat i "slabší" aktivky ted nemyslím kvalitou ale signálem, aktivní neznamená automaticky hlasitější než pasiv.
jednoduše to ber tak že některý aktivky sou fakt namáklý a ten pasivní by zkreslovali proto je aktivní naschvál na ně přidušenej naopak jiný aktivky třeba ani nedosahujou síly pasivních snímačů(běžně jakákoliv modern ibanez basa)
hlavu bych si z toho nedělal.....takový bartoliny to sou uplný šeptadla :-)
tohle je například doporučení od SWR
PASSIVE/ACTIVE INPUT JACK
This input jack is designed to accommodate both "passive" instruments and most "active" instruments. A passive instrument has no
built-in preamp and does not use a battery, while an active bass utilizes a battery-operated preamp for gain, tone controls, or both.
The Passive/Active Input will work with all instruments having a maximum output of less than 1 volt RMS. Some active pickups such
as EMG, Bartolini, etc., use batteries for operation and will work perfectly using this input. Instruments made by MTD, Sadowsky,
Modulus, etc., have active electronics that are suited for use in the Passive/Active input.
Generally speaking, try this input first. If you hear a small amount of distortion and the preamp clip LED is not activated, try using the
Active input jack. If the Active input does not correct any audible distortion, check the battery in your bass.
ACTIVE INPUT JACK
The Active input jack should be used with instruments having a built-in (on board) preamp or other sound sources that will produce
output levels greater than 1 volt RMS. The number of bass manufacturers has increased significantly over the years, and it's impossible
to try and keep track of them all. Generally, if you have very "hot" pickups and/or tone controls installed in your instrument, and
you use them to boost the level of your bass signal 10 dB or more, you may find the Active input more compatible. The best judge is
your own ears.
If you're using a keyboard or bass pedal with the Workingman's 2x10C, we have found the best choice to be the Active input.
basy přicházejí a odcházejí
------------------------------------------------------------------------
Fender Precision '86, GK 700RB-2, Line6 410
diky
